Kaubit
primer BE 12
|
 |
Lahusti vaba, bituumenkruntvärv, mis sobib siduva agendina kõrg- ja keskmiselt adsorbeeruvatele pindadele. Kasutage kruntkihina sünteetiliselt modifitseeritud bituuminoosse pakskihi jaoks vastavalt DIN 18195-2
|
Kaubit
primer BT-L |
 |
Lahustil põhinev, bituuminoosne kruntvärv kasutamiseks kuumakantud Bitulast'ga ning kälma isekleepuva Kaubit Bitulast Sealing Membrane KSK niisketel kuid mitte märgadel pindadel. Sobib mineraalsetele pindadele nagu betoon, gaasbetoon, poroton, liivalubja telliskivi ning tellis- kivitöödele vastavalt DIN 18195.
|
Kaubilat
Bitumenlatex
|
 |
Certificate No.
Sertifikaat P-5316/9545, MPA - BS. Pragukattev, lateks bituumenemulsioon, lahustivaba. Pole pahtlit, blokeerib välja pinna niiskust, kuhjunud vett, ning niiskuse leket. Kruntvärvina KMB jaoks segage veega 1:10; rahuldab DIN 4030 nõuded.
|
Kaubilat
1K Thick Coating |
 |
Testsertifikaat Nr. 22 001350 01, MPA NRW. Sünteetilislt modifitseeritud, polüstüreen-täidetud, ühekomponendiline pakskate hoonte kattematerjalide jaoks vastavalt DIN 18195. Sobib niisketele kuid mitte märgadele pindadele.
|
Kaubilat
1K Thick
Coating
paintable
|
 |
Kõrge viskoossusega, pintsliga kantav, 1-komponeentne, täidisevaba, pragukattev kummi-bituminoosne emulsioon. Viidab välja niiskust ja blokeerib niiskuse leket.
|
Kaubilat
2K Thick Coating |
 |
Kahekomponentne, sünteetililiselt modifitseeritud bituminoosne kate veekindlaks tegemiseks vastavalt Juhisele 11/01 ning DIN 18195 08/00. Eriti sobib kasutamiseks vihmasel aastaajal ja isolatsioonipaneelide fikseerimiseks.
|
Kaubilat
2K Thick Coating
sprayable
|
 |
Testsertifikaat Nr. 22 00134801, MPA NRW. 2-komponentne, kiududega tugevdatud, pihustatav bituminoosne pakskate hoonte veekindlaks tegemiseks vastavalt DIN 18195 ja Juhisele 11/01. Eriti tasuv kate tänu aega säästvale töötlusele.
|
Kaubit
silo coating |
 |
Lahustil põhinev, kiiresti kuivav silokate; vastupidav soojuse, vedelsõnniku, agressiivkeskonna ja kemikaalide vastu. Eriti sobiv silokonteineritele nisu/maisi, rohelise loomasööde, kartulite, jne jaoks.
|
Kaubit
Bitulast
|
 |
Kuumalt töötlev katesegu hoonte, lamekatuste ning vuukide veekindlaks tegemiseks. Mälu-effekt, kõrgelt elastne materjal.
|
Kaubit
sealing
membrane KSK |
 |
Elastne, täielikult isekleepuv, külmtöötlev isolatsioonimembraan; ühes küljes on lamineeritud kahekihiline rebimiskindel kiie kõrgtihedusega polüetüleenist (HDPE). Ettenähtud kooremaga tüüpi 4 ja 5 kasutamiseks vastavalt DIN 18195, keskmine pinge. Peale rakendamist on võimalik kohe katta teiste materjalidega. On võimalik rakendada kruntvärvita horisantaalsel pinnal koormaga. Paksus: 1.5 mm.
|
Kaubit
sealing membrane KSK Alu
|
 |
Elastne, täielikult isekleepuv, külmtöötlev alumiiniumiga lamineeritud isolatsioonimembraan. Sobib kasutamiseks auruisoleerijana kipspõranda alla. Paksus: 1.5 mm.
|
Kaubit
sealing
slurry
|
 |
Hüdrauliliselt seadistatuv, kõrge vastupidavusega veekindel sulfaat-suspensioon hea kleepuvus jõuga mineraal pindadele mõlemalt poolt nii positiivsest kui nigatiivsest. Sobib kasutamiseks lisa veetõkkena septilistes paakides ja stip tihendina vundamenti ning vertikaalse kivimüüri vahel.
|
Kaubit
flex-sealing
slurry 2K
|
 |
2-komponendiline veekindel suspension suurepärase kleepuva jõuga mineraal pindadele, ettenähtud usaldusväärseks veetõkkeks uute ja vanade konstruktsioonide jaoks vee imendumisest mõlemalt poolt nii positiivsest kui ka negatiivsest. Eriti sobib negatiivse imendava vee võitlemiseks võlvi piirkondades ehitamise ajal.
|
Kaubit
special sealing
slurry
|
 |
Kiiresti seadistuv tsementeeruv veekindel emulsion kõrge vastupidavusega agressivse veelahuse vastu. See on üks veetõkkesüsteemi komponentidest (1...4. ning 5. töö samm).
|
Kaubit
water stop |
 |
Tsementeeruv, katalüütiliselt kiirendatud kiirtahkestaja mis seab püsivalt ja kindlalt sekundidega peale veega kokku puutumist. (2. tööaste veetõkkesüsteemis).
|
Kaubit
water stop
system
|
 |
Jäiga süsteemi vastupidav kattematerjal seintele ja põrdatele imendumise ja voolava vee vastu seestpolt ning voolava vee vastu väljastpolt. Süsteempaki sisu:
1.5 kg Kaubit veekindel emulsion
1.5 kg Kaubit veetõkke
0.5 kg Kaubit WS Vedel
|
Kaubit
barrier mortar
|
 |
Vetthülgav tõkkemört vastavalt DIN 18550, MG P lll, tahkena minimaalselt kokkutõmbav. Ettenähtud süvendatud alkoovide hollow covings, õhuaukude tegemiseks ja lisaks ka veekindla krohvina vundamentides.
|
Kaubit
borehole
suspension
|
 |
Hydraulically
setting, modified suspension for filling fissures
in conjunction with horizontal barriers in mineral
building materials. It is used to fill and
stabilize cracks and voids before applying Kaubit
Horizontal Stop and to plug drill holes after
finishing the sealing works.
|
Kaubit
horizontal stop |
 |
Mobile,
solvent-free silification agent seals out rising
moisture in mineral building materials. The sealed
area solidifies simultaneously. For pressure or
unpressurized injection method.
|
Kaubit
horizontal stop
(self-emptying)
|
 |
Mobile,
solvent-free silification agent seals out rising
moisture in mineral building materials. This
method is only suited for stone works with
humidity penetration up to 60%. With humidity over
60% see Kaubit Horizontal Stop (pressure injection).
|
Kaubit
borehole
suspension
|
|
Hydraulically
setting, modified suspension for filling fissures
in conjunction with horizontal barriers in mineral
building materials. It is used to fill and
stabilize cracks and voids before applying Kaubit
Horizontal Stop and to plug drill holes after
finishing the sealing works.
|
Kaubit
horizontal stop |
|
Mobile,
solvent-free silification agent seals out rising
moisture in mineral building materials. The sealed
area solidifies simultaneously. For pressure or
unpressurized injection method.
|
Kaubit
horizontal stop
(self-emptying)
|
|
Mobile,
solvent-free silification agent seals out rising
moisture in mineral building materials. This
method is only suited for stone works with
humidity penetration up to 60%. With humidity over
60% see Kaubit Horizontal Stop (pressure injection).
|
Kaubit
WS liquid
|
 |
Mobile,
solvent-free silification agent. One of the water
stop system components, the 3rd immediate work
step after Water Stop; penetrates deep in the
surface and solidifies mineral building materials.
|
Kaubit
sealing tape GTD |
 |
Elastic,
NBR - rubber sealing tape with polyester -
polyamide fleece for bridging wide structural
joints and expanding horizontal and vertical
joints between buildings. The tape can be used
with bitumen as well as with epoxy coatings.
|
Kaubit
KBV 30
|
 |
Inspection
report 44-01-15http://www.kaubit.de/vGr.
A sealing tape on the basis of
rubber-bitumen-emulsion with projecting fleece ply.
For sealing expanding structural joints with
bituminous coating.
|
Kaubit
fungicide |
 |
Solvent-free
fungicide combats dry rot, bacteria, fungus spores
and algae. Frost- and de-icing salt-resistant.
|
Kaubit
salt binder |
 |
Aqueous,
solvent-free solution with wetting agent additive.
Mineralises harmful salts, seals und hardens
surfaces as well as stops rotting process and
inhibits biological colonisation. Prevents harmful
salts from penetrating Sealing Slurry.
|
Kaubit
sprayable underplaster
|
 |
Ready-mixed,
hydraulically setting dry mortar with mineral
additives. It creates strong bond between
redeveloped masonary work and subsequent plaster
coatings.
|
Kaubit
porous underplaster |
 |
Hydraulically
setting reconstruction plaster with excellent
adhesive strength on mineral surfaces. It can be
used as a salt accumulator for extremely saline
surfaces and as filling plaster for exceptionally
rough surfaces. Meets the MG P Ila specifications.
|
Kaubit
facing plaster white
|
 |
High-diffusion
plaster, enables natural drying of restored
masonry work. With its waterproofing properties it
inhibits hydroscopic water absorption. Can be set
in one working process in 2.5 cm-thick layers.
Meets WTA data sheet specifications and DIN 18550.
MG Pll.
|
Kaubit
facing plaster
grey |
 |
High-diffusion
plaster, enables natural drying of restored
masonry work. With its waterproofing properties it
inhibits hydroscopic water absorption. Can be set
in one working process in 2.5 cm-thick layers.
Meets WTA data sheet specifications and DIN 18550.
MG Pll.
|
Kaubit
facing and filler plaster
|
 |
Diffusion-porous,
weather-resistant grey plaster with added strength;
designed for use with Kaubit Restoration System.
For smooth, fine-grained surfaces.
|
Kaubit
facade cleaner |
 |
Organic
acid-based cleaning agent eliminates lime-,
concrete efflorescence and carbonate deposits from
facing masonry of every kind, without polluting
masonry with harmful chlorides. For interior and
exterior use.
|
Kaubit
siloxan |
 |
Water-repellent,
vapour permeable, transparent facade hydrophobe
protects masonry against heavy rain and humidity.
Suited for absorbent and moderately absorbent
mineral building materials.
|
Kaubit
PC
coarse mortar
|
 |
Plasticised,
hydraulically setting coarse mortar according to
ZTV-SIB 90 with good wall and overhead stability.
It is designed for use when restoring and
reprofiling concrete surfaces in accordance with
PCC l and ll. For hydraulic structures according
to ZTV-W.
|
Kaubit PCC
concrete Filler |
 |
Plasticised
fine filler is designed for restorating concrete
surfaces in accordance with PCC l and ll. It can
be applied in the thinnest layers without adhesive
slurry and can be applied in layers of up to 5 mm.
|
Kaubit
concrete coating
|
 |
Coloured,
solvent-free acrylate-based concrete paint is
designed for coating concrete surfaces. This
product provides excellent durability to the
surface due to its high-quality, UV-resistant
acrylate dispersion. Colour on the request.
|
Kaubit
primer
UKD 100
|
 |
Solvent-free,
mobile primer for absorbent and moderately
absorbent surfaces to be used as a base for the
subsequent acrylate coatings. It is particularly
suited as a primer for Kaubit Roof Coating.
|
Kaubit
roof coating |
 |
Solvent-free,
UV-resistant, crack-bridging, acrylate-based
coating designed for roof maintenance: concrete,
roof tiles, bituminised boards, trapeze steel
plates and fibre-cement plates. Min. 5° roof
slope is essential. Colours: according to Kaubit
colour card, other colours available on request.
|
Original
kaubitan |
 |
1-component,
solvent-free, crack-bridging and elastic rubber
bitumen emulsion is designed for renewal and
sealing of weathered bitumen coatings with roof
slope min. 5° as well as universal moisture
protection on mineral surfaces.
|
Kaubit
silver finish coat E
|
 |
Solvent-free,
synthetic resin coating, reflective coating
reduces temperature caused by solar radiation;
UV-resistant, vapour-permeable. Designed for roofs
made of bituminised boards, trapeze steel plates
and fibre-cement plates with min. roof slope 5°.
|
Kaubit
Primer
UKD 200
|
 |
Solvent-free
primer for absorbent and moderately absorbent
mineral surfaces such as gypsum board, concrete,
plaster according to DIN 18550, MG II + III. |
Kaubit
Sealer |
 |
Solvent-free,
adhesive and protective primer for absorbent and
moderately absorbent mineral surfaces such as
gypsum board, concrete, plaster according to DIN
18550, MG II, III, IV + V. Prevents quick water
withdrawal from subsequent coatings into the
surface. |
Kaubit
Super Primer 100
|
 |
Solvent-free
primer with adhesion-corrective fillers for
perfect bonding layers on absorbent and
non-absorbent wall and floor interior and exterior
surfaces. It is not suited for solvent-based
adhesives.
|
Kaubiflex
FA
Sealing Compound
|
 |
Test
certificate no. M 7036, MPA Clausthal.
Solvent-free sealer; apply with roller, brush or
spatula; Kaubiflex is a liquid foil designed for
sealing under tiles, walls and floors, in damp and
wet rooms. For Class I + II according to ZDB Data
Sheet. |
Kaubiflex
FA
Sealing Slurry 1K |
 |
Crack-bridging,
hydraulically setting, 1-component, sealing slurry
is designed for sealing masonry surfaces in
combination with ceramic tiling in bath and shower.
Meets Building Standard Class A 1. A 2 and B
according to building guidelines. Meets Humidity
Class I, II + III according to ZDB Data Sheet. Can
also be used as a building sealer for concrete
maintenance applications.
|
Kaubiflex
FA
Sealing Slurry 2K |
 |
Hydraulically
setting, 2-component, elastic sealing slurry is
designed for sealing sustainable masonry surfaces
in combination with ceramic facings, such as cast
plaster floors, concrete and gas concrete. Can
also be used as a building sealer for concrete
maintenance applications. Meets Class I, ll + IIl
according to ZDB Data Sheet. |
Kaubiflex
FA
Sealing Tape
|
 |
Silicone-compatible
sealing tape with reinforced edging for a easy
adjustment during application.
Meets Class I II and III according to ZDB Data
Sheet and A1, A2 to abP. Use as corner
former as well as junction as well as expanding
joint bridge. Colour: grey. |
Kaubit
Object Sealing Tape
WV |
 |
Silicone-compatible,
elastic sealing tape with projecting fleece for
bridging junctions and expanding joints. Use in
combination with composite sealing procedures.
Meets Class I II and III according to ZDB Data
Sheet and A1, A2 to abP. Colour: grey. |
Kaubit
FA
Sealing Tape NG 120
|
 |
Fabric-reinforced, elastic sealing tape, made of
NBR rubber. Use as corner former as well as joint
bridge according to ZDB Data Sheet in composite
sealing procedures. Kaubit FA Sealing Tape is
absolutely silicone-compatible and can be supplied
with (NG 120 GZ) or without fabric-free zone (NG
120).
Meets Class I, II, III and IV according to ZDB Data
Sheet and A1, A2, B and C to abP. Colour: grey.
|
Kaubit
FA
Sealing Tape
120 GZ |
 |
Fabric-reinforced, elastic sealing tape, made of
NBR rubber. Use as corner former as well as joint
bridge according to ZDB Data Sheet in composite
sealing procedures. Kaubit FA Sealing Tape is
absolutely silicone-compatible and can be supplied
with (NG 120 GZ) or without fabric-free zone (NG
120).
Meets Class I, II, III and IV according to ZDB Data
Sheet and A1, A2, B and C to abP. Colour: grey.
|
Kaubiflex
FA
Inside Corner
|
 |
Elastic,
pre-formed element is a lasting seal for inside
corners in combination with sealing system under
ceramic tiling.
Meets Class I, II and III according to ZDB Data
Sheet and A1, A2 to abP. Colour: grey.
|
Kaubiflex
FA
Outside Corner |
 |
Elastic,
pre-formed element is a lasting seal for outside
corners in combination with sealing system under
ceramic tiling.
Meets Class I, II and III according to ZDB Data
Sheet and A1, A2 to abP. Colour: grey. |
Kaubiflex
FA
Wall Packing |
 |
Lasting
seal for ?" pipe outlets feeding shower and
bathroom faucets in combination with sealing
system under ceramic tiling. Colour: grey.
|
Kaubiflex
FA
Floor Packing |
 |
Elastic
seal for pipe outlets and floor drains in
combination with sealing system under ceramic
tiling. Meets Class II and III according to ZDB
Data Sheet and A2 to abP. Colour: grey. |
Kaubit
Sealant Set
|
 |
Sealing
set for water-tight, crack-bridging seals under
ceramic shower tiling.
Set contains:
- 1 bucket Kaubiflex FA Sealing
Compound, 4 kg
- 1 roll Kaubiflex FA Sealing Tape 5 m
- 2 Kaubiflex FA Wall Packing
- 1 roller
|
Kaubit
dispersion
adhesive
|
 |
Ready-to-use
dispersion adhesive according to DIN 18156-D. Use
to lay ceramic tiling to masonry as well as on
existing tiling. Add Portland cement to
water-proof dispersion adhesive for floor and
exterior applications.
|
Kaubit
FM-flex |
 |
Highly
flexible, hydraulically setting, plasticised
thin-bed mortar with for ceramic cladding such as
stoneware, earthenware, fine earthenware as well
as concrete blocks for interior and exterior uses.
The mortar is water-proof, heat- and
frost-resistant. Kaubit FM-Flex fulfils
Classification C 2TE. |
Kaubit
FM-flex quick setting
|
 |
Highly
flexible, water-hardening, plasticised thin-bed
mortar for ceramic cladding such as stoneware,
earthenware, fine earthenware as well as concrete
blocks for interior and exterior uses. The mortar
is water-proof, heat- and frost-resistant. Kaubit
FM-Flex quick fulfils Classification C 2F. |
Kaubit
marble flexible
mortar MFM |
 |
Highly
flexible, hydraulically setting, white thin-bed
mortar. This mortar hardens with minimum shrinkage
even when applied in thick layers. For laying
translucent, calibrated natural flagstones in
interior and exterior applications. Kaubit
Marble-Flex Mortar MFM fulfils the Classification
C 1T |
Kaubit
marble flexible
mortar MFM quick setting
|
 |
Highly
flexible, hydraulically setting, white thin-bed
mortar. The mortar reduces moisture penetration
and so inhibits efflorescence. It hardens with
minimum shrinkage even when applied in thick
layers. For laying translucent, calibrated natural
flagstones in interior and exterior applications.
Kaubit Marble-Flex Mortar MFM quick fulfils the
Classification C 1FT. |
Kaubit
joint mortar
|
 |
Hydraulically
setting joint mortar hardens crack free and water
proof. For filling ceramic tiling joints such as
stoneware, earthenware; joint width: 2 to 5 mm.
For interior and exterior use. Colours: white,
silver-grey and grey, other colours available on
request. |
Kaubit
marble grout |
 |
Hydraulically
quick setting, quartz-free joint mortar hardens
crack-free and remains water-tight. For filling
natural stone cladding joints such as Jurassic
marble, rimstone. Joint width: 0 to 5 mm. For
interior and exterior use. Colours: according to
colour list, other colours available on request. |
Kaubit
flex grout
|
 |
Hydraulically
quick setting joint mortar. For filling
earthenware and fine earthenware joints on heated
and non-heated cast plaster floors. For split
clinker and many other ceramic floor coverings.
Joints width: 3 to 20 mm. Particularly suited for
areas with high moisture and thermal stress. |
Kaubit
flexible grouting cement |
 |
Hydraulically
quick setting joint mortar hardens crack-free and
remains water-tight. For filling earthenware and
fine earthenware joints on unheated case plaster
floors. For split clinker and many other ceramic
floor covering. Joint width: 3 to 20 mm. |
Kaubit
levelling
compound NM
|
 |
Hydraulically
quick setting, self-levelling compound levels out
unevenness and deviations from dimensional
tolerances. For interior and exterior use. Suited
for heated cast plaster floors. Layer thickness: 3
to 20 mm. |
Kaubit
floor levelling
compound BA |
 |
Plasticised,
quick setting levelling compound levels out
unevenness and deviations from dimensional
tolerances in indoor areas. Not suited for
consistent moisture stress. Layer thickness: 1.5
to 10 mm. |
Kaubit
acrylate floor coating |
 |
1-component,
solvent-free, weather-resistant acrylic-based
coating for floors subjected to normal stress,
such as in warehouses, garages, balconies and
terraces. Available with and without chip solids.
Colour: grey. |
Kaubit
Sealing Membrane AGN 773
|
 |
STUFA REPORT, Fabric-reinforced
sealing membrane on the basis of rubber-bitumen to
transmit forces between tubing segments in tunnel
construction when using the shield tunneling
method.
|
Kaubilat
Haftbitumen
|
 |
One-component,
highly elastic, solvent-free,
rubber-bitumen-emulsion as adhesive for the
mounting of Kaubit Sealing Membrane Type AGN 773.
|
Kaubit
Adhesive HW 21 |
 |
Adhesive
without softening agents, suitable as mounting aid
for fixing foamed plastics, Kaubit Sealing
Membrane Type AGN 773 etc.
|
Kaubit
Joint Tape No. 45
|
 |
Protection
tape against soiling of sealings that are applied
to tubing segments in tunneling.
|
